Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V – Part 1: Standard strength and end fittings
standard by International Electrotechnical Commission, 05/18/2016
Category: IEC
IEC 61167 Ed. 4.0 b:2018
Metal halide lamps – Performance specification
standard by International Electrotechnical Commission, 04/27/2018
IEC 61076-4-107 Ed. 1.0 b:2001
Connectors for electronic equipment – Part 4-107: Printed board connectors with assessed quality – Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displa
standard by International Electrotechnical Commission, 08/22/2001
IEC 61975 Ed. 1.1 b:2016
High-voltage direct current (HVDC) installations – System tests CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 09/12/2016
IEC 61788-17 Ed. 1.0 b:2013
Superconductivity – Part 17: Electronic characteristic measurements – Local critical current density and its distribution in large-area superconducting films
standard by International Electrotechnical Commission, 01/16/2013
IEC 61587-5 Ed. 1.0 b:2013
Mechanical structures for electronic equipment – Tests for IEC 60917 and IEC 60297 – Part 5: Seismic tests for chassis, subracks and plug-in units
standard by International Electrotechnical Commission, 12/10/2013
IEC 61000-4-4 Ed. 2.1 b:2011
Electromagnetic compatibility (EMC) – Part 4-4: Testing and measurement techniques – Electrical fast transient/burst immunity test CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 03/30/2011
IEC 61326-2-3 Ed. 2.0 b:2012
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-3: Particular requirements – Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
standard by International Electrotechnical Commission, 07/10/2012
IEC 61249-2-11 Ed. 1.0 b:2003
Materials for printed boards and other interconnecting structures – Part 2-11: Reinforced base materials, clad and unclad – Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
standard by International Electrotechnical Commission, 11/12/2003
IEC 61784-5-6 Ed. 1.0 en:2007
Industrial communication networks – Profiles – Part 5-6: Installation of fieldbuses – Installation profiles for CPF 6
standard by International Electrotechnical Commission, 12/14/2007