IEC 60335-2-90 Ed. 3.2 b:2014

Household and similar electrical appliances – Safety – Part 2-90: Particular requirements for commercial microwave ovens CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 09/19/2014

IEC 60512-25-7 Ed. 1.0 b:2004

Connectors for electronic equipment – Tests and measurements – Part 25-7: Test 25g – Impedance, reflection coefficient, and voltage standing wave ratio (VSWR)
standard by International Electrotechnical Commission, 12/15/2004

IEC 60072-1 Ed. 6.0 b:1991

Dimensions and output series for rotating electrical machines – Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080
standard by International Electrotechnical Commission, 02/01/1991

IEC 60603-5 Ed. 1.0 b:1987

Connectors for frequencies below 3 MHz for use with printed boards – Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 in) spacing
standard by International Electrotechnical Commission, 01/01/1987

IEC 60034-14 Ed. 3.1 b:2007

Rotating electrical machines – Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher – Measurement, evaluation and limits of vibration severity CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 03/29/2007

IEC 60633 Ed. 2.2 b:2015

Terminology for high-voltage direct current (HVDC) transmission CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 07/29/2015