Specifications for particular types of winding wires – Part 11: Bunched solderable polyurethane enamelled round copper wires, class 130, with silk covering CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 09/27/2005
Category: IEC
IEC 60282-1 Ed. 7.0 b:2009
High-voltage fuses – Part 1: Current-limiting fuses
standard by International Electrotechnical Commission, 10/13/2009
IEC 60044-6 Ed. 1.0 b:1992
Instrument transformers – Part 6: Requirements for protective current transformers for transient performance
standard by International Electrotechnical Commission, 03/30/1992
IEC 60708 Ed. 1.0 en:2005
Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath
standard by International Electrotechnical Commission, 06/24/2005
IEC 60603-13 Ed. 1.0 b:1995
Connectors for frequencies below 3 MHz for use with printed boards – Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID)
standard by International Electrotechnical Commission, 01/25/1995
IEC 60364-4-44 Ed. 2.1 b:2015
Low-voltage electrical installations – Part 4-44: Protection for safety – Protection against voltage disturbances and electromagneticdisturbances CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 09/23/2015
IEC 60151-15 Ed. 1.0 b:1967
Measurements of the electrical properties of electronic tubes and valves. Part 15: Methods of measurement of spurious and unwanted electrode currents
standard by International Electrotechnical Commission, 01/01/1967
IEC 61788-7 Ed. 3.0 en:2020
Superconductivity – Part 7: Electronic characteristic measurements – Surface resistance of superconductors at microwave frequencies
standard by International Electrotechnical Commission, 03/20/2020
IEC 63180 Ed. 1.0 b:2020
Methods of measurement and declaration of the detection range of detectors – Passive infrared detectors for major and minor motion detection
standard by International Electrotechnical Commission, 06/24/2020
IEC 60512-8 Ed. 3.0 b:1993
Electromechanical components for electronic equipment; basic testing procedures and measuring methods – Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations
standard by International Electrotechnical Commission, 04/26/1993